Important Steps in Installing a Satellite Dish
With the recent breakthroughs in the communication world, DSL connection has already become a household term. It has already been launched in various areas across the world; however, obtaining a high-speed access to the Internet via satellite is a technology that is still unavailable to many television users because of lack of facilities. At present, the solution to this limitation can now be achieved through the satellite dish network. Whether you live in an area with DSL access or not, you can now utilize DSL technology to the extreme.
If you intend to use satellite dish for your homes or offices, you must receive transmitted signals through a clear view of the southern hemisphere. You must ensure that your chosen location is free from any obstruction like trees, buildings and other structures that can alter your signal and in effect, cause poor reception. If your site is free from any obstruction, it is not necessary to locate the co-ordinates until later when you decide to install the dish system. When you live within these areas, you can install your dish on a galvanized pole that is cemented in the ground or by positioning it no further than 100 ft. from your area.
To give you a better idea regarding this, here are some steps to install a satellite dish successfully and get it authorized:
?X First, you must know the satellite service in your location. Say, if you live in Europe, you can choose between AFN and Direct to Sailor (DTS). The former has a greater number of channels available but doesn??t have worldwide service while the latter has worldwide coverage but has fewer program channels.
?X Next, you must find the technical information on the satellite that will be used in the whole process. Then, you have to search for the ??look angle?? ?V this is the direction in which the satellite dish has to be pointed to get the signal.
?X Finally, set up the system all together by assembling and pointing the satellite dish, connecting and programming the decoder. After selecting the proper location, you have to distinguish where to mount the dish. To get the best reception possible, it is advisable that you mount the dish outside your home or office such as in surfaces like roofs, decks, chimneys, etc. Most areas will be pre-wired with the correct RG-6 coaxial cable used in both satellite TV and cable services. You must also pre-install external outlets in each room where the televisions are situated. Take note that you must always install RG-6 cable and not any other type of cable.
In addition, you can also place a satellite receiver at the vicinity of the cable outlet in your home or office depending on the number of televisions connected to the satellite system. The said receivers are like a smaller version of a VCR that actually processes the signal from the satellite dish to your TV for sharp, stunning, digital quality pictures.
If the location that you have chosen is questionable and you are planning to install the satellite dish yourself, you might need a compass and position yourself towards the southern hemisphere. You will first need to know the correct azimuth ?V the horizontal direction of your dish and the direction of the communications satellites in orbit ?V and your elevation co-ordinance. You have to expect these elements to differ by geographical location.
Furthermore, major satellite TV providers namely: DirecTV and Dish Network have ??satellite dish pointing basics?? on their sites that are established by your zip code. And if you intend to make use of terrestrial DSL, the variant via satellite will perfectly suit you. With it, you will benefit both by saving your charges and valuable time. While you pay the low fees for the channels you receive, you can also find service providers that provide you with hundreds of dollars of satellite TV equipment including dish, receivers, etc. for free.